dmesg - 2012-04-17 20:13
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-220.7.1.el6.x86_64 (mockbuild@c6b18n3.bsys.dev.centos.org) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Wed Mar 7 00:52:02 GMT 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 0000000000100000 - 00000000bf699000 (usable)
BIOS-e820: 00000000bf699000 - 00000000bf6af000 (reserved)
BIOS-e820: 00000000bf6af000 - 00000000bf6ce000 (ACPI data)
BIOS-e820: 00000000bf6ce000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
DMI 2.6 present.
SMBIOS version 2.6 @ 0xFCAB0
DMI: Dell Inc. PowerEdge R310/05XKKK, BIOS 1.8.2 08/17/2011
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 100000000 mask F00000000 write-back
3 base 200000000 mask E00000000 write-back
4 base 400000000 mask FC0000000 write-back
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf699 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf699000
0000000000 - 00bf600000 page 2M
00bf600000 - 00bf699000 page 4k
kernel direct mapping tables up to bf699000 @ 8000-d000
init_memory_mapping: 0000000100000000-0000000440000000
0100000000 - 0440000000 page 2M
kernel direct mapping tables up to 440000000 @ b000-1d000
RAMDISK: 37113000 - 37fef105
ACPI: RSDP 00000000000f12d0 00024 (v02 DELL )
ACPI: XSDT 00000000000f13d0 00094 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000bf6c3bb4 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000bf6af000 03E5B (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 00000000bf6c6000 00040
ACPI: APIC 00000000bf6c3478 00152 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000bf6c35cc 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000bf6c3620 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DM__ 00000000bf6c365c 000A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000bf6c3850 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000bf6c3890 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000bf6c39c8 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000bf6b2fdc 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000bf6b324c 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000bf6b2e5c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000bf6b2e8c 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000bf6c3b4c 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000bf6c7000 02784 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000440000000
Bootmem setup node 0 0000000000000000-0000000440000000
NODE_DATA [0000000000018000 - 000000000004bfff]
bootmap [0000000000100000 - 0000000000187fff] pages 88
(8 early reservations) ==> bootmem [0000000000 - 0440000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000200c824] TEXT DATA BSS ==> [0001000000 - 000200c824]
#3 [0037113000 - 0037fef105] RAMDISK ==> [0037113000 - 0037fef105]
#4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#5 [000200d000 - 000200d461] BRK ==> [000200d000 - 000200d461]
#6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
#7 [000000b000 - 0000018000] PGTABLE ==> [000000b000 - 0000018000]
found SMP MP-table at [ffff8800000fe710] fe710
Reserving 130MB of memory at 48MB for crashkernel (System RAM: 17408MB)
[ffffea0000000000-ffffea000edfffff] PMD -> [ffff880028600000-ffff8800365fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00440000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000bf699
0: 0x00100000 -> 0x00440000
On node 0 totalpages: 4191799
DMA zone: 56 pages used for memmap
DMA zone: 115 pages reserved
DMA zone: 3827 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765649 pages, LIFO batch:31
Normal zone: 46592 pages used for memmap
Normal zone: 3361280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 32 CPUs, 24 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 0000000000100000
PM: Registered nosave memory: 00000000bf699000 - 00000000bf6af000
PM: Registered nosave memory: 00000000bf6af000 - 00000000bf6ce000
PM: Registered nosave memory: 00000000bf6ce000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880036600000 s92632 r8192 d22056 u131072
pcpu-alloc: s92632 r8192 d22056 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4130756
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 16302584k/17825792k available (5084k kernel code, 1058596k absent, 464612k reserved, 7229k data, 1244k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:664
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2927.591 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5855.18 BogoMIPS (lpj=2927591)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20782 entries in 82 pages
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU X3470 @ 2.93GHz stepping 05
Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
Brought up 8 CPUs
Total of 8 processors activated (46826.82 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xdf0fc000-0xdf0fc3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xdf0fe000-0xdf0fe3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xfca0-0xfca7]
pci 0000:00:1f.2: reg 14 io port: [0xfc90-0xfc93]
pci 0000:00:1f.2: reg 18 io port: [0xfca8-0xfcaf]
pci 0000:00:1f.2: reg 1c io port: [0xfc94-0xfc97]
pci 0000:00:1f.2: reg 20 io port: [0xfcc0-0xfccf]
pci 0000:00:1f.2: reg 24 io port: [0xfcd0-0xfcdf]
pci 0000:00:1f.5: reg 10 io port: [0xfcb0-0xfcb7]
pci 0000:00:1f.5: reg 14 io port: [0xfc98-0xfc9b]
pci 0000:00:1f.5: reg 18 io port: [0xfcb8-0xfcbf]
pci 0000:00:1f.5: reg 1c io port: [0xfc9c-0xfc9f]
pci 0000:00:1f.5: reg 20 io port: [0xfce0-0xfcef]
pci 0000:00:1f.5: reg 24 io port: [0xfcf0-0xfcff]
pci 0000:05:00.0: reg 10 64bit mmio: [0xd6000000-0xd7ffffff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.1: reg 10 64bit mmio: [0xd8000000-0xd9ffffff]
pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
pci 0000:05:00.1: PME# disabled
pci 0000:00:05.0: bridge 32bit mmio: [0xd6000000-0xd9ffffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:1c.4: bridge 32bit mmio: [0xda000000-0xddffffff]
pci 0000:01:03.0: reg 10 32bit mmio pref: [0xd5800000-0xd5ffffff]
pci 0000:01:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
pci 0000:01:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
pci 0000:01:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd5800000-0xd5ffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.LYD0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.LYD2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 28 on node 0
alloc kstat_irqs on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
hpet: hpet6 irq 28 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x880-0x8ff has been reserved
system 00:07: ioport range 0x900-0x91f has been reserved
system 00:07: ioport range 0x920-0x923 has been reserved
system 00:07: ioport range 0x924-0x924 has been reserved
system 00:07: ioport range 0xca0-0xca7 has been reserved
system 00:07: ioport range 0xca9-0xcab has been reserved
system 00:07: ioport range 0xcad-0xcaf has been reserved
system 00:08: ioport range 0xca8-0xca8 has been reserved
system 00:08: ioport range 0xcac-0xcac has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0xfed50000-0xfed51fff has been reserved
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:04
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem disabled]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 05-05]
pci 0000:00:05.0: PCI bridge, secondary bus 0000:05
pci 0000:00:05.0: bridge window [io disabled]
pci 0000:00:05.0: bridge window [0xd6000000-0xd9ffffff]
pci 0000:00:05.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.4: bridge window [io disabled]
pci 0000:00:1c.4: bridge window [0xda000000-0xddffffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge window [0xd5800000-0xd5ffffff]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:05: resource 1 mem: [0xd6000000-0xd9ffffff]
pci_bus 0000:02: resource 1 mem: [0xda000000-0xddffffff]
pci_bus 0000:01: resource 1 mem: [0xde000000-0xdeffffff]
pci_bus 0000:01: resource 2 pref mem [0xd5800000-0xd5ffffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:03.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15216k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1334684480.159:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31870
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 8AD22ECE441B7180
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:05.0: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 31 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 32 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
ERST: Could not register with persistent store
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 22, io mem 0xdf0fc000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-220.7.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdf0fe000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-220.7.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2012-04-17 17:41:21 UTC (1334684481)
Initalizing network drop monitor service
Freeing unused kernel memory: 1244k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1040k freed
Freeing unused kernel memory: 1756k freed
dracut: dracut-004-256.el6_2.1
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
ata_piix 0000:00:1f.2: version 2.13
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xfca0 ctl 0xfc90 bmdma 0xfcc0 irq 20
ata2: SATA max UDMA/133 cmd 0xfca8 ctl 0xfc94 bmdma 0xfcc8 irq 20
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.5: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
Refined TSC clocksource calibration: 2927.221 MHz.
Switching to clocksource tsc
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfcb0 ctl 0xfc98 bmdma 0xfce0 irq 21
ata4: SATA max UDMA/133 cmd 0xfcb8 ctl 0xfc9c bmdma 0xfce8 irq 21
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.1: new high speed USB device using ehci_hcd and address 3
usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1.1: configuration #1 chosen from 1 choice
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
usb 2-1.1: new full speed USB device using ehci_hcd and address 3
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: TSSTcorp DVD+/-RW TS-L633J, D250, max UDMA/100
ata3.00: configured for UDMA/100
usb 2-1.1: New USB device found, idVendor=058f, idProduct=9254
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: Generic USB Hub
usb 2-1.1: Manufacturer: ALCOR
usb 2-1.1: configuration #1 chosen from 1 choice
hub 2-1.1:1.0: USB hub found
hub 2-1.1:1.0: 4 ports detected
usb 2-1.1.1: new full speed USB device using ehci_hcd and address 4
usb 2-1.1.1: New USB device found, idVendor=054c, idProduct=005d
usb 2-1.1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 2-1.1.1: Product: SCE USB Keyboard Hub
usb 2-1.1.1: Manufacturer: Sony Computer Entertainment Inc.
usb 2-1.1.1: configuration #1 chosen from 1 choice
hub 2-1.1.1:1.0: USB hub found
hub 2-1.1.1:1.0: 2 ports detected
usb 2-1.1.2: new low speed USB device using ehci_hcd and address 5
usb 2-1.1.2: New USB device found, idVendor=046d, idProduct=c03d
usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.2: Product: USB-PS/2 Optical Mouse
usb 2-1.1.2: Manufacturer: Logitech
usb 2-1.1.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.0/input/input2
generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.1.2/input0
ata4: failed to resume link (SControl 0)
ata4: SATA link down (SStatus 4 SControl 0)
usb 2-1.1.3: new low speed USB device using ehci_hcd and address 6
usb 2-1.1.3: New USB device found, idVendor=10d5, idProduct=55a4
usb 2-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1.3: Product: 4 Port KVMSwicther
usb 2-1.1.3: Manufacturer: No brand
usb 2-1.1.3: SerialNumber: 3ôò
usb 2-1.1.3: configuration #1 chosen from 1 choice
input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.0/input/input3
generic-usb 0003:10D5:55A4.0002: input,hidraw1: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:1d.0-1.1.3/input0
usbhid 2-1.1.3:1.1: couldn't find an input interrupt endpoint
ata2.01: failed to resume link (SControl 0)
ata1.01: failed to resume link (SControl 0)
usb 2-1.1.1.1: new full speed USB device using ehci_hcd and address 7
usb 2-1.1.1.1: New USB device found, idVendor=054c, idProduct=005c
usb 2-1.1.1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
usb 2-1.1.1.1: Product: SCE USB Keyboard
usb 2-1.1.1.1: Manufacturer: Sony Computer Entertainment Inc.
usb 2-1.1.1.1: configuration #1 chosen from 1 choice
input: Sony Computer Entertainment Inc. SCE USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1.1/2-1.1.1.1:1.0/input/input4
generic-usb 0003:054C:005C.0003: input,hidraw2: USB HID v1.00 Keyboard [Sony Computer Entertainment Inc. SCE USB Keyboard] on usb-0000:00:1d.0-1.1.1.1/input0
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 0)
ata2.01: SATA link down (SStatus 4 SControl 0)
ata1.00: ATA-8: WDC WD5003ABYX-18WERA0, 01.01S02, max UDMA/133
ata1.00: 976773168 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata2.00: ATA-8: WDC WD5003ABYX-18WERA0, 01.01S02, max UDMA/133
ata2.00: 976773168 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5003ABYX-1 01.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA WDC WD5003ABYX-1 01.0 PQ: 0 ANSI: 5
scsi 2:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633J D250 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sdb: sdb1 sdb2
sda1 sda2
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
md: bind
md: bind
md: raid1 personality registered for level 1
bio: create slab at 1
md/raid1:md0: active with 2 out of 2 mirrors
created bitmap (4 pages) for device md0
md0: bitmap initialized from disk: read 1/1 pages, set 0 of 7325 bits
md0: detected capacity change from 0 to 491516715008
md0: unknown partition table
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/md0
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1334684484.207:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead-collector: starting
udev: starting version 147
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011)
bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:05:00.0: setting latency timer to 64
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1a.fw
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:05:00.0: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 16, node addr 00:10:18:d2:d2:e4
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
bnx2 0000:05:00.1: setting latency timer to 64
bnx2 0000:05:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1a.fw
bnx2 0000:05:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:05:00.1: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 17, node addr 00:10:18:d2:d2:e6
bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:02:00.0: setting latency timer to 64
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1a.fw
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:02:00.0: eth2: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 16, node addr d4:ae:52:88:8d:24
bnx2 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
bnx2 0000:02:00.1: setting latency timer to 64
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1a.fw
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:02:00.1: eth3: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 17, node addr d4:ae:52:88:8d:25
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a 3420 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
udev: renamed network interface eth3 to em2
udev: renamed network interface eth0 to p2p1
udev: renamed network interface eth1 to p2p2
udev: renamed network interface eth2 to em1
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 2:0:0:0: Attached scsi generic sg2 type 5
microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
platform microcode: firmware: requesting intel-ucode/06-1e-05
microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
platform microcode: firmware: requesting intel-ucode/06-1e-05
microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
platform microcode: firmware: requesting intel-ucode/06-1e-05
microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
platform microcode: firmware: requesting intel-ucode/06-1e-05
microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x4
platform microcode: firmware: requesting intel-ucode/06-1e-05
microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x4
platform microcode: firmware: requesting intel-ucode/06-1e-05
microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x4
platform microcode: firmware: requesting intel-ucode/06-1e-05
microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x4
platform microcode: firmware: requesting intel-ucode/06-1e-05
Microcode Update Driver: v2.00 , Peter Oruba
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ACPI Error: No handler for Region [IPMI] (ffff880436125420) [IPMI] (20090903/evregion-319)
ACPI Error: Region IPMI(7) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff880436124f60), AE_NOT_EXIST
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff880436124420), AE_NOT_EXIST
ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20090903/power_meter-759)
Adding 8388600k swap on /dev/sda1. Priority:-1 extents:1 across:8388600k
Adding 8388600k swap on /dev/sdb1. Priority:-2 extents:1 across:8388600k
readahead-disable-service: delaying service auditd
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 33 for MSI/MSI-X
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 34 for MSI/MSI-X
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 35 for MSI/MSI-X
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 36 for MSI/MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 37 for MSI/MSI-X
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 38 for MSI/MSI-X
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 39 for MSI/MSI-X
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 40 for MSI/MSI-X
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 41 for MSI/MSI-X
bnx2 0000:02:00.0: em1: using MSIX
ADDRCONF(NETDEV_UP): em1: link is not ready
bnx2 0000:02:00.0: em1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
em1: no IPv6 routers present
readahead-collector: starting delayed service auditd
readahead-collector: sorting
readahead-collector: finished
ERST: NVRAM ERST Log Address Range is not implemented yet
EXT4-fs (md0): Unaligned AIO/DIO on inode 12334147 by fio; performance will be poor.